Concrete Spraying Machine
– SSB 05.1
10
VI. Accessories
The machine is delivered with optional accessories set corresponding with
required output.
Each type of accessories set differs from each other by an inner diameter of
transport hose. Marking DN xx (e.g. DN 40 = transport hose with an inner
diameter 40 mm).
Accessories
Rotor 1,9L
Rotor 3,9L
Rotor 6,9L
DN 25
X
---
---
DN 32
X
X
---
DN 40
X
X
---
DN 50
---
---
X
Standard set of accessories consists of:
-
End hose with the nozzle – 20 m
-
Extension hose – 20 m
-
Water hose – 20 m
-
Upper sealing plate – 3 pcs
-
Lower sealing plate – 3 pcs
-
Nozzle ending – 2 pcs
The set of accessories can be adjusted according to the customer’s requirements
(length of hoses, number of sealing plates etc.).
VII. Material
The material used in manufacturing the machine conforms to the valid
manufacturing documentation as regards chemical composition and mechanical
properties.
Aggregate properties for sprayed concrete conform to standards ČSN EN 12620 a
ČSN EN 13055-1.
VIII. Executions
All parts have been manufactured according to production blue-prints. Intolerance
dimensions conform to standards CSN ISO 2768-1.
The electric wiring conforms to standards CSN EN 60204-1. Protection against
the dangerous touch voltage is secured by an automatic switch off the source.
