Fike Twinflex pro2 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 80

Fike Twinflex pro2 Скачать руководство пользователя страница 30

TWINFLEX

®

pro² Control Panel Engineering and Commissioning Manual

30

The Test Buzzer function toggles on and off to ensure correct buzzer
operation unless the buzzer has been disabled by fitting a jumper link
to LK1 on the PCB. The test light will illuminate while this action is
taken.

The Test Keyboard function enables the user to select each button to
ensure the correct function is shown on the screen. Press the

ESC

key

TWICE

to exit the menu.

The Silent Test function allows the selection of one or more detection-
zones to operate in a ‘silent one-man walk test mode’. On triggering a
device, the device LED operates, the sounder does not sound and the
control panel indicates an alarm. After approximately 5 seconds the
system will reset the device and another may be tested. The control
panel event log will indicate that a test mode has been selected. This
operation will also enable the test LED.

N.B. To put ALL zones into test, enter 00 for the zone number.

The Local Audible Test function allows the selection of one or more
detection-zones to operate in a ‘one-man walk test mode with local
sound’. On triggering a device, the device LED operates, the sounders
within that zone operate and the control panel indicates an alarm. After
approximately 5 seconds, the system will reset the device and another
may be tested. The control panel event log will indicate that a test
mode has been selected.

N.B. To put ALL zones into test enter 00 for the zone number.

2. Test Modes

1. Test Cntrls & Disp

4. Test Keyboard

2. Test Modes

2. Test Zone

1. Silent Test

2. Test Modes

1. Test Cntrl & Display

2. Test Keyboard

2. Test Modes

2. Test Zone

2. Audible Test

01/09/09 22:26 SUPR
BUZZER TESTING..
BUZZER ON
Press Enter Key

01/09/09 22:26 SUPR
KEYBOARD TESTING..
ENTER key PRESSED.
Press Enter Key

01/09/09 22:26 SUPR
SILENT TEST (ZONES).
ENTER ZONE:00
Press Enter Key

01/09/09 22:26 SUPR
TEST ZONE 01
1.START 2.END
Press <> OR Esc Key

01/09/09 22:26 SUPR
AUDIBLE TEST (ZONES)
ENTER ZONE:00
Press Enter Key

01/09/09 22:26 SUPR
TEST ALL ZONES
1.START 2.END
Press <> OR Esc Key

2. Test Modes

1. Test Cntrls & Disp

3. Test Buzzer

www.acornfiresecurity.com

www.acornfiresecurity.com

«
...
28
29
30
31
32
...
»

Содержание Twinflex pro2

















































































Отзывы:

Нет отзывов