Fike FIK-UV-IR-F-HD Series, Руководство пользователя

Страница: 15 / 32

FIK-UV-IR-HD User Manual Doc. No. 06-935.02
For more information & Technical support: (800)-979-FIKE (3453) 9
Table 2- Sensitivity Levels
Sensitivity level Detection distance in feet (meters)
Low 15 (5)
Medium 50 (15)
High 75 (23)
Extreme 100 (30)
Further details about the response characteristics of the detector at the different sensitivity
settings can be found in Appendix A.
3.2 Ultra-Fast Detection
The ultra-fast detection feature allows detection of fireballs and explosions at 40 milliseconds. This
feature can be disabled or enabled regardless of the alarm delay configuration.
3.3
Alarm Delay
When a flame is detected, the flame detector delays the execution of the alarm outputs by the
configured time period. After this time delay, the detector re-evaluates the situation. If a flame is still
detected the alarm outputs are activated.
3.4 Alarm Latch
If alarm latch is enabled, the detector outputs will remain in alarm mode even after a flame is no
longer detected. To return the detector outputs to normal mode the detector must be powered
down and restarted.
3.5 Window Heater
The detector is equipped with a heater to prevent condensation and icing on the window. If
enabled, the heater is operated automatically depending on temperature.
3.6 Video settings
The detector is equipped with a video camera and processing module. If enabled (“Video
module” setting) the detector provides video outputs and records flame alarm events. The
events are recorded from 1 minute before the flame was detected to 1, 2 or 3 minutes after
(depending on the “post alarm video recording duration” setting).
Digital video output is provided via ethernet and ONVIF Profile S protocol. Composite (analog) video
output is provided in NTSC or PAL format, depending on the “Video analog output” setting.