Fiio M3 Complete, Руководство пользователя

Страница: 14 / 22

Born for Music and Happy
14 / 22
6)
Sleep timer (min.)
Use this option to set a timer for the player to power off after the specified
number of minutes, regardless of music playing or button presses on the M3. This
is useful e.g. as a timer for listening at bedtime.
The Sleep timer can be set to Off or 10 to 120 minutes in 12 steps.
Press OK on this option to show adjustment slider for Sleep timer (min.), Up /
Down to adjust the time and OK to start the timer (or Menu to cancel).

After the sleep timer is set, a clock icon will appear on the status bar on top of the display.

The sleep timer will reset to off after it has triggered (turned the M3 off).
7)
Theme
There are two themes available: Theme 1 and Theme 2. From the Categories menu
screen, hold the Menu button to enter Quick Menu, choose System settings > Theme
to enter theme selection interface. Use the Up and Down button to choose the
theme as needed then press the OK button to complete setting.
8)
Screen-off button response
There are three modes of Screen-off button responses: Direct action, Screen wakeup
only and Wake + action. From the Categories Menu, hold the Menu button to enter
Quick Menu. Select the System settings then enter the Screen-off button response,
use the up and down buttons to choose the mode as needed and press OK button to
complete setting.
Under Direct action mode and screen off, press any button to realize corresponding
function without turning on screen;
Under Screen wakeup only mode and screen off, press any button to turn on screen
without corresponding operation;
Under Wake + action mode and screen off, press any button to realize corresponding
function and turn on screen.
9)
About M3
Select this option to display the following info on the M3 (in this order): player
model, firmware version, internal storage (total size), internal storage (available size),
micro SD card (total size), micro SD card (available size), number of songs stored,
player serial number, and player NB code.
Press OK on this option to show this information, press Menu or OK to return to
settings menu.