Fife MAXCESS SE-42, Руководство по эксплуатации

Страница: 3 / 18

INTRODUCTION 1 - 1
SE-42R / SE-42
Infrared light sensor
www.maxcess.eu MI 1024 1 C
Ein
führ
ung.fm
1 INTRODUCTION
About these operating
instructions
These Operating Instructions describe the installation, operation
and maintenance of the SE-42 sensor and provide important
instructions for proper use.
These Operating Instructions are directed to both the system
construction master as well as the operator who uses the SE-42
sensor in production. The Operating Instructions must be read
and used by all persons who have the responsibility of installing,
operating and maintaining the SE-42 sensor.
The Operating Instructions must be carefully kept and must
always be available throughout the service life of the SE-42
sensor.
Note:
This operating manual also applies to sensor SE-42R.
Translation of the original Operating Instructions:
These Operating Instructions are a translation. The original
Operating Instructions were composed in German.
Proper usage
The SE-42 sensor is used for no-contact measurements of the
lateral offset of the material web that is being controlled.
The SE-42 is suitable for:
– Web edge guiding and
– Web center guiding for dual application.
The SE-42 sensor can be used to control both opaque and
transparent materials. A web guide controller must be used with
transparent materials to calibrate the sensor to the material. For
more information, see the web guide controller operating
instructions.
The SE-42 sensor must only be used in accordance with its
intended purpose and in a technically flawless conditions.
The SE-42 sensor must not be changed or opened.