SAFETY INSTRUCTIONS
2 - 2
SE-42R / SE-42
Infrared light sensor
www.maxcess.eu
MI 1024 1 C
Symbols
Warning/caution - dangerous area
Reference to general hazards that may result in bodily injuries
or damage to the device.
Warning/caution - danger due to crushing
Refers to danger of injury caused by crushing
Warning/caution - danger due to cutting
Refers to danger of injury caused by cutting
Additional symbols
– This endash is followed by an enumeration.
∙
This dot is followed by a prompt to do something.
Note:
Reference to important information.
Preventing hazards
∙
The SE-42 sensor may not be used as a support, handle or
step. There is a danger that the sensor will become damaged
(breaking off/snapping), resulting in personal injury.
Mounting and
commissioning
∙
A damaged sensor must not be installed or placed in
operation.
∙
Assembly work must be performed while the machine is
stopped and protected against being turned on again.
∙
All assembly tasks must only be performed when there is no
electrical power in the system.
∙
The sensor must not be placed in operation unless it has
been securely mounted.
∙
Electrical connections should always be made or disconnected
on the sensor while there is no electrical power in the system.
Failure to observe these instruction may result in damage to
the sensor.
