Fife CDP-01, Дополнительное руководство пользователя

Страница: 11 / 18

SUPPLEMENTARY OPERATING MANUAL 2
2 -
3
02-11-05
CDP-01
Figure Sheet 1-811-B
Explanation of the Operating Modes
Note: All Start-up Procedures must be performed before Automatic and Servo
Center modes are used.
MANUAL
’Manual’
Select ‘Manual’ via external control.
The active drives are switched to Manual.
Check: LED (3) lit.
Sensor mode selection and setup functions can be
performed, if desired.
‘Left’
‘Right’
Press the - or + key to set ‘Left’ or ‘Right’ to manually alter
the position of the drive.
JOG MANDREL LEFT / RIGHT
Select ‘Jog Mandrel Left’ or ‘Jog Mandrel Right’ via
external control to manually alter the position of the
mandrel.