Fife CDP-01, Дополнительное руководство пользователя

Страница: 12 / 18

SUPPLEMENTARY OPERATING MANUAL 2
2 -
4
02-11-05
CDP-01
Figure Sheet 1-811-B
AUTOMATIC
’Automatic’
The sensor mode must be pre-selected for Guiding.
Select ‘Automatic’ via external control.
The sensor output signal and the position of the mandrel
are recorded.
The mandrel drive is switched to Automatic. The
mandrel now follows the sensor output signal.
System gain can be altered, if desired. Guide point shifts
are not allowed in this application.
Reference: CDP-01 Reference Manual, ‘Basic Settings’
section.
EXTERNAL LOCK
’External Lock’
Set ‘External Lock’ via external control.
Note: Automatic guiding is suspended as
long as External Lock is present on the parallel port.
CENTER MANDREL
’Center
Mandrel’
Select ‘Center Mandrel’ via external control.
The mandrel moves to the center of the stroke.
Check: LED 2 lit.