Fife CDP-01, Дополнительное руководство пользователя

Страница: 7 / 18

SUPPLEMENTARY OPERATING MANUAL 1
1 -
1
02-11-05
CDP-01
Figure Sheet 1-811-B
GENERAL INTRODUCTION
Application Description
Application is a Recoiler using the SE-34 Sensor. Linear analog position feedback is used on the
mandrel. The mandrel to sensor bandwidth ratio is programmable. The CDP-01 can be operated
from the keypad (internal control) or via the parallel port (external control). When placed in
automatic mode, the sensor output signal and the mandrel position are recorded. The sensor
continues to monitor the web edge and the mandrel, then follows the sensor output signal.
A CDP-01-H12 or CDP-01-M12 is required for this application.
Software Part Numbers
The software part numbers are located on the side of the CDP-01 housing. They include the
Matrix Setup no. (MS), State Machine no. (SM) and firmware version ( Dx ).
CDP version: CDP-01-H12
D1:5650xx-02x MS: 100055-02x Please quote these
or CDP-01-M12 D2:5650xx-02x SM: 100056-02x details with all inquiries.
D3:5650xx-02x FIFE USA
Connecting the System Components
The system components are to be connected according to the Cable Connection Diagram
contained in the documentation.