Triangle Tube’s ProtoNode Startup Guide
Page 23 of 40
ProtoCessor
1991 Tarob Court Milpitas, California 95035 USA
Web
5.1 Commissioning ProtoNode FPC-N35 on a LonWorks Network
Figure 20: LonWorks Service Pin Location
5.1.1 Instructions to Upload XIF File from ProtoNode FPC-N35 Using FS GUI Web Server
Commissioning may only be performed by the LonWorks administrator.
The User will be prompted by the LonWorks Administrator to hit the Service Pin on the ProtoNode FPC-N35
at the correct step of the Commissioning process which is different for each LonWorks Network
Management Tool.
•
If an XIF file is required, see steps in Section 5.1.1 to generate XIF
•
Connect a standard CAT5 Ethernet cable (Straight through or Cross-Over) between the PC and
ProtoNode
•
The Default IP Address of ProtoNode is
192.168.1.24
, Subnet Mask is
255.255.255.0
. If the PC and
ProtoNode are on different IP Networks, assign a static IP Address to the PC on the 192.168.1.xxx
network
•
For Windows XP:
Go to
>
>
Right-click on Local Area Connection > Properties
Highlight
>
•
For Windows 7:
Go to
>
>
>
>
Right-click on Local Area Connection > Properties
Highlight
>
5
LONWORKS (FPC-N35): COMMISSIONING PROTONODE ON A LONWORKS NETWORK