Fieldmann FZN 70405-0, Руководство пользователя

Страница: 10 / 18

EN 10
FZN 70405-0
Safety instructions
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of residual current device (RCD) reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the infl uence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
Use personal means of protection. Always wear eye protection. Safety equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used in conformity with the working conditions will reduce
personal injuries.
Avoid accidental starting. Ensure the switch is in the off-position before connecting the battery, storing or
carrying the power tool. Carrying power tools with your fi nger on the switch or plugging in power tools that
have the switch on invites accidents.
Remove any adjusting tools or wrenches before turning the power tool on. An adjusting tool or wrench left
attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts,. If devices are provided for
the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use
of these devices can reduce dust-related hazards.
POWER TOOL USE AND MAINTENANCE
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Unplug the power cord from the mains outlet and/or remove the battery from the power tool before making
any adjustments, changing accessories, or storing power tools. Such preventative safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, pay particular attention to cracks,
breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner
intended for the particular type of power tool, considering the given working conditions and the work to be
performed. Use of the power tool for operations other than those for which the power tool is intended could
result in hazardous situations.