Fieldmann FZN 70405-0, Руководство пользователя

Страница: 14 / 18

EN 14
FZN 70405-0
Operation
5. OPERATION
SWITCH DEVICE ON / OFF
Insert the battery into the designated rail.Then press the safety button (Figure 1, point 6) sideways, only then can
you operate the on / off switch (Figure 1, point 7).The device now starts.When you release the on / off switch, the
device stops working.Attention: The cutting tool can still run a little.
WORK INSTRUCTIONS
Hold the device with both hands on the handles provided.
The hedge trimmer can move forward with its double-sided cutting knife and backwards or with a pendulum
movement from one side to the other side.
First cut the sides of the hedge and then the top edge.
Cut the hedge from bottom to top.
Hold the hedge trimmer at an angle of 5–10 ° to the hedge to create a straight cut.
Cut the hedge trapezoidal.This prevents discoloration of the lower hedge area due to lack of light.
Cut the top edges of the hedge slightly round.