Fieldmann FDN 3025-A, Руководство пользователя

Страница: 16 / 80

EN 16
Maintenance and storage
FDN 3025-A
before using it. Many accidents are caused by neglected maintenance of a tool. Properly maintained cutting
tools with sharp cutting edges are less prone to jamming in a workpiece and are easier to handle.
Maintain cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
prone to jamming in a workpiece and are easier to handle.
Use electric power tools, accessories, working tools, etc. according to these instructions in a manner
appropriate for the given type of electric power tool and take into consideration the work conditions and the
type of work that you will be performing. Using electric power tools for purposes other than those for which
they were designed may be dangerous.
Damaged switches must be replaced at an authorised service centre or the vendor. Do not use electric
power tools that cannot be turn on and off.
Do not leave electric power tools turned on without supervision. Always turn the tool off and wait for it to
come to a complete stop before putting it down.
Use hearing protection. Excessive noise levels may cause hearing damage.
When performing tasks, where the working tools may come into contact with hidden electrical conductors,
hold the electric power tool by the insulated part that is intended to be held. A work tool that comes into
contact with a “live” electrical conductor, will cause the uninsulated parts of the tool to become live and may
subsequently cause injury by electrical shock to the operator.
For repairs contact an authorised service centre or vendor who will use original spare parts. This will ensure
the correct operation of the electric power tool.
ATTENTION!
Using any accessories or tools not recommended in this user’s manual may increase the
risk of injury. Always use only original spare parts.
Clean the tool after the completion of every work task.
Do not use worn or damaged drill bits and drilling extension pieces. Such tools may overload the motor and
lower effectiveness.
Take proper care to prevent the motor from damage by oil or water.
Regularly check that the tool has not been damaged during the course of standard operation. Make sure that
all parts are correctly connected and do not use this product if any of its parts has been damaged or lost.
When inserting the battery into the charger, ensure that the battery is inserted in the correct manner and that
there are no materials between the battery contacts, e.g. soils.
The battery and the charger should be protected from heat and the sun. Do not expose these products to
extreme temperatures.
Do not use the device in an outdoor environment.
Use only the charger supplied with this tool.
If the product is damaged or malfunctions, contact an authorised service centre or the vendor.
Storage
Store the tool in a dry location at a suffi cient distance from heat sources or dangerous vapours.
Do not place any other items on the machine.