Fieldmann FDN 3025-A, Руководство пользователя

Страница: 13 / 80

EN
4V CORDLESS NAIL GUN USER’S MANUAL
Operating instructions
13
Work only during good visibility or ensure suffi cient artifi cial lighting.
Work in a clean and tidy working environment.
Make sure that while working you maintain a fi rm and stable stance. Do not forget that falls represent one of
the major causes of injuries during accidents.
When drilling metal sheets use a vice and place a piece of wood underneath the sheet. A rotating metal
sheet presents a serious risk.
Make sure that the drill or screwdriver are not used for work on items under live current, to prevent injury by
electrical shock. Before using this tool, check that you know the location of all electrical conductors or cables
in the wall (use a metal detector for this purpose).
Only store and use the product away from fl ammable or volatile materials and solutions.
Keep the product away from extreme temperatures, direct sunlight and excessive humidity. Do not use in
a dusty environment.
Do not place the product near heaters, open fi res or other appliances or equipment that are sources of heat.
Do not spray the product with water or any other liquid. Do not pour water or any other liquids into the
appliance. Do not submerge the appliance in water or any other liquid.
Never leave the appliance switched on without supervision.
Do not touch machine parts until they have come to a complete stop.
Allow the motor to cool down before storing the machine in a closed room.
Under no circumstances should you repair or alter the product yourself. Entrust all repairs and adjustments
of this product to an authorised service centre or the vendor. Tampering with the appliance during the
warranty period may void the warranty.
The manufacturer is not responsible for damages caused by incorrect use of this product or its accessories.
Such damages include food spoilage, injuries, burns, scalding, fi re, etc.
Electrical safety
ATTENTION!
Read all the safety warnings and all instructions. If you fail to follow the provided
warnings and instructions an injury caused by electrical shock could occur as well as
fi re or serious injuries.
Note:
Keep these warnings and instructions for future use. The term “electric power tool” in all warnings relates to your
tool powered from the mains (it has a power cord installed) or cordless tools (without a power cord).
The charger of the cordless device can be connected to any power plug, preventing discharge, that is
installed according to norms in force.
The plug must be powered at 230V 50Hz.
Disconnect the charger if you will not be using it for a long time, if you are changing the tool or performing
maintenance on the tool.
The power plug on the tool’s charger cord must correspond to the power socket. Never modify the power
plug in any way. Do not use any power plug adapters for tools protected by grounding. Unmodifi ed power
plugs and corresponding power sockets reduce the risk of injury by electrical shock.
Do not touch grounded surfaces such as pipes, heaters, electrical stoves and refrigerators when working
with the machine. When your body is grounded the risk of injury by electrical shock is increased.