Before replacing the filter, turn off the appliance and unplug from the power
source
.
Clean Pre-Filter
It is recommended that the pre-filter screen be cleaned using a dust collector,
as shown, approximately every 1 to 3-months.
This will extend the life of the HEPA
filter and ensure the unit is running
optimally.
Filter Replacement Steps
Step 1: With both hands on the
upper side of the appliance, first
pull the front cover in the
direction of 1, then lift the front
cover in the direction of 2.
Step 3: Pull the tag of the
HEPA filter to remove the filter
from the air purifier.
Carefully place used filter into
disposable bag.
Step 2: Press the clasps of
the pre-filter frame down, releasing
the frame, then pull the pre-filter
towards you.
Pull the pre-filter down and out of
the frame. Carefully place the used
pre-filter into disposable bag. Save
the Pre-filter screen frame.
Cleaning of the Appliance
Clean the air purifier once a month. If the operating environment is poor,
increase the cleaning frequency.
Before cleaning, turn off the appliance and unplug from the power source
.
When Cleaning or Servicing this appliance use OSHA approved safety
glasses, gloves and mask.
Clean it with a soft, dry cloth. Do not use alcohol, gasoline, benzene or
other chemical solvents for cleaning.
Step 4: Insert new pre-filter into
pre-filter frame. Place the bottom
of the pre-filter frame into the
slots on the bottom of the
appliance and press the top
towards the appliance until the
clasps click closed.
14
13
