background image

TABLE OF CONTENTS

Safety Precautions                              01-02
Product Overview                                03-04
Operation Instructions                          05-11
Maintenance Instructions                     12-13
Filter Replacement                               14-15
Common Problems and Solutions        15-17
Transportation and Storage Conditions    17

SAFETY PRECAUTIONS

Please read the instructions carefully and

completely before proceeding with

installation of the product to better

understand the product and to prevent

personal injury and damage.

To reduce the risk of fire or electric shock, do not use this appliance with any solid-state 

speed control device.

Do not spray any paint, insecticide, ethyl alcohol, or any other chemical agent on

the appliance’s surface. It can cause a crack, electric shock, or fire. If there is a

chemical accumulated inside of the device, it will be discharged from the air outlet and

dispersed back into the living space. Please ensure the room is well ventilated if

using any of the listed chemicals.
The air purifier should not be used in a flammable and combustible environment

or environment with corrosive air.
When the device is on, please do not touch the air inlet or outlet, or put a hand or

any object into the air outlet so as to prevent injury or damage to the product.
Do not sit on or place any objects on the device. 
Device is designed for indoor, dry location installation. Not intended for bathroom or high 
humidity enviornment. Improper usage may cause fire, electric shock, or malfunction.
Do not modify, dismantle or repair the appliance. This may cause fire, electric shock, 
or malfunction.

This appliance is equipped with a polarized plug (one blade is wider than the other). To 

reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. 

If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 

qualified electrician. Do not attempt to defeat this safety feature. 
Do not use the appliance if the power cord or plug is broken, damaged, and/or defective. This 

can cause electric shock or fire. Do not touch the power cord with a wet hand. 

To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts 

that have not been recommended by the manufacturer .

Please clean the foundation and remove the primary filtration net of the PM2.5

module to make sure the appliance performs as intended.
Unplug the device from the wall before moving or performing any maintenance.
Unplug the device from the wall if it will not be used for an extended period of time.
Turn the device off and unplug from the wall if there is a peculiar smell coming from the 
appliance. Contact manufacturer technical support if this occurs.
Do not place foreign objects into the air outlet. Please check the unit for foreign

objects before use.
The air purifier should be placed at least 20in (50cm) from the wall or other objects.

Unplug or disconnect the appliance from the power supply before performing any service 

or maintenance on the appliance. 
This product complies with the maximum allowable concentration of ozone of 0.050

parts per million by volume (ppmv) in a 24-h period. 

WARNING - Failure to follow the instructions below can damage the product

or cause personal injury.

WARNING - Failure to follow the instructions below can damage the product

or cause personal injury.

Lorem ipsum

02

01

Содержание TRIO Plus S











Отзывы: