Step 5: Slide the pre-filter into the
pre-filter frame from the bottom.
Then place the bottom of the
pre-filter frame into the slots on
the bottom of the appliance and
press the top towards the appliance.
Pre-filter
MAINTENANCE INSTRUCTIONS
To increase the life of the air purifier, perform regular maintenance and
care. Before performing maintenance, be sure to shut down the air purifier
and unplug the power plug from the power source.
The TRIO Plus S calculates the recommended replacement of the filter based
on operation time and fan speed. If the unit is run at higher speeds, the filters
will likely capture more particles, and require replacement earlier than if the
purifier was run at low speeds, filtering less air.
It is recommended that the filter kit (Pre-filter, HEPA filter) be replaced every 6
months of operation
Filter Indicator Timing
Step 6: Place front cover on the unit once
all the filters have been installed.
Slide the front cover slots on the base
into the slots on the appliance (direction 2)
and then push the top towards the unit until
the cover clicks closed.
1-3 Months
Every 6 months of
operation
Remove front panel and clean
pre-filter screen
Replace filter Kit: Pre-filter, HEPA
(Not the pre-filter framed screen)
Filter Kit # 602604600 (kit contains
all required filters for replacement)
Maintenance Period
Replacement Parts
HEPA filters is best replaced every 3 to 6 months, depending on the
use situation. High-efficiency HEPA filters and pre-filters cannot be
washed.
12
11
