manualshive.com logo in svg

FIC A360 Reference and, Справочное и сервисное руководство, Страница: 128 / 187

Поделиться
Скачать
FIC A360 Reference and Скачать руководство пользователя страница 128

 

Maintenance & Disassembly 

4.

 

Underneath the palm-rest cover, you will see the glidepad module assembly. Remove the 
five screws on the glidepad converter board where the glidepad wire cable is connected. 

 

 

 

Figure 5-5 

Removing Palm Rest / Glide Pad 

 

5.

 

When the converted board is removed, you can remove the select-button bracket casing 
covering the glidepad board. 

 
6.

 

Replace a new glidepad module and reverse the procedure to reassemble. 

 

5.5.4  Removing the Internal Hard Disk Drive 

The notebook provides a built-in hard disk for the primary IDE controller. The HDD is an 
industry standard 2.5” IDE disk drive with a maximum height of 9.5mm. 
  
1.

 

Find out the built-in hard disk secured with one screw at the upper right corner of the hard 
disk. Remove this screw and carefully pull the hard disk module from the connector. 

 

 

Glidepad 
module

 

Palm-rest 
panel/cover

 

Connectors 

screws

 

Figure 5-6 

The disassembly of Hard Disk Drive 

 

5-8 

FIC A360 Service Manual 

Содержание A360 Reference and




























































































































































































Отзывы:

Нет отзывов