
Page 126
FiberPatrol IDS Software Guide
•
Query/modify basic detection settings
•
Query/modify zone assignments, add/delete zones
•
Query/modify zone-specific detection settings
•
Modify interface parameters (enable/disable reporting, set reporting interval, select report
mode)
Communication timing
By default, FiberPatrol alarm reports are transmitted approximately once per second. When a new
alarm is generated, a report with the new alarm information is transmitted immediately. Alarm
information is transmitted for as long as an alarm is active (typically, for the duration of an event
plus 60 seconds). The reporting interval is adjustable. Continuous reporting can be disabled, in
which case an alarm report must be requested by a query command.