14.3
Arrangement after Layout
After the connection of the optical fibers is completed,
entrance and fiber passage area with dedicated fiber b
1
Connect the optical fibers on the ODF side.
2
The optical interfaces not connected with fiber pigtails
connected with optical interfaces should be covered w
4
3
Remove the temporary labels; make project labels and
Rules for Binding Optical Fibers
Rules for Binding Optical Fibers
Illustration
When binding a bunch of optical
fibers, keep a distance of 20 cm
between the fiber binding straps.
Do not twist, bend, stretch or
squeeze optical fibers when
ti
th
connecting them.
The bend radius (R) of the optical
cable should not be smaller than
10 times the optical cable’s
diameter, and should not be
smaller than 30 mm.
The optical fibers should contact
the loop side of the fiber binding
strap and should not contact the
hook side.
Tidy up the optical fibers before
binding them.
Bind the optical fibers with fiber
binding straps with appropriate
tightness.
Do not cross or twist the optical
2
21
Do not cross or twist the optical
fibers whenever possible.
installers should bind the optical fibers between the cabinet
binding straps to secure them.
should be covered with anti-dust caps. The fiber pigtails not
ith pigtail caps.
d attach them to both ends of the optical fibers.
1
1
