10
Preparations for Cable Connection
For the connection and layout of wires and
corresponding outdoor cabinet user manua
The installers can choose the top access w
according to the equipment room and the i
mode is used as an example).
The AN6001-G16 can use the following PD
choosing a PDP.
PDP260B (3000063)
Instruction
Before laying out wires and cables, you ne
limited for operations, remove the baffle at
After you have completed layout of wires a
original places.
(
)
PDP296B (3000068)
For a cabinet equipped with mouseproof h
on the top, fasten the mouseproof hop-po
Preparing Wiring Holes on the Cabinet
Note
Instruction
Pierc
diago
external wires and cables are led into the
well arranged.
For a cabinet equipped with a cover plate
or bottom of the cabinet, determine the po
and number of wiring holes according to
plan. Pierce the cover plate with diagonal
desired positions to make wiring holes. T
introduces how to make wiring holes on t
cabinet.
Prepare the holes from near to far in
Polish the raw edges of holes so that
not cut hands or cables.
Recommended Areas and
Sequence for Making Wiring Holes
L
M
R
g
edge
a wir
1
11
L
M
R
n
d cables inside an outdoor cabinet, please refer to the
al.
wiring mode or the floor access wiring mode
installation site conditions (here the top access wiring
DPs. Please refer to
Product Overview
for the rules of
eed to remove the front panel of the PDP. If space is
t the bottom of the PDP.
and cables, restore the front panel and baffle to their
hop-pockets
ckets after
Fastening the mouseproof hop-
pockets on the top of the cabinet
ce the cover plate with
onal pliers along the
cabinet and
e on the top
osition, size
the wiring
l pliers at
he following
he top of the
sequence.
t they will
Making a Wiring Hole
p
g
es desired for making
ring hole
1
1
