8
Replacing a Module
When replacement of a module is required
the module connector on the backplane be
replacement.
If resistance is encountered when you are
module, pull out the module and check wh
mounting direction, slot position, and mod
correct. Do not force in a module in such a
Do not contact a module with bare hands
Caution
Do not contact a module with bare hands.
ESD protection gloves or ESD protection w
operating on a module.
If a module is not to be installed immediat
its original ESD protection bag and put it i
place, keeping it away from sunlight and s
electromagnetic radiation sources.
Align the left and right edges of
the module with the slide rails
in the target slot (with the
component side of the module
facing upward) and slowly
h th
d l i
l
th
1
push the module in along the
slide rails.
Push the module to its position,
and tighten the captive screws
on the panel of the module to
lock it.
2
9
9
d onsite, check
efore the
e plugging a
hether the
ule type are
a case.
Always wear
M3
Captive
screw
Cross
screwdriver
ESD protection gloves /
wrist strap
Always wear
wrist strap when
tely, pack it with
n a dry and cool
strong
9
9
