Select the right type of the optical fiber jumpe
local equipment and opposite end equipment.
correspond to two types of optical fiber conne
LC/PC Optical Fiber Connector
14
Connecting the Optical Fiber Jum
Instruction
Caution
See the table below for the major specifications a
SC/PC optical fiber connectors. When the equipm
short optical fiber connectors.
Type
Short Optical Fiber Connector
LC/PC
31 mm
14.1
Connecting the External Optical Fibers
Caution
SC/PC
39 mm
The open corrugated pipes should not be
pipe with the diameter of 32 mm should ca
2 mm.
It is recommended that the corrugated pip
1
Internal pipe
External pipe
19
It is recommended that the corrugated pip
Arrange the corrugated pipe outside the c
room.
r according to the type of the optical interfaces on the
. The optical interfaces on the AN6001-G16
ectors: LC/PC and SC/PC.
SC/PC Optical Fiber Connector
per
and appearance of the commonly used LC/PC and
ment is mounted in a cabinet, it is advisable to use the
Long Optical Fiber Connector
48 mm
55 mm
overloaded with optical fibers. An open corrugated
arry no more than 60 optical fibers with the diameter of
pe inside the cabinet should be about 10 cm long
9
9
pe inside the cabinet should be about 10 cm long.
cabinet according to the conditions of the equipment
