18
ADVAnCED PARAMETERS
19. Paired buttons association for and
This parameter allows to activate paired buttons association mode
for and buttons. Paired buttons are dependent and association
are sent only to groups.
turns devices on and increases value,
turns them off and decreases value.
Available settings:
0
- paired buttons association
inactive
1
- paired buttons association
active
Default setting:
0
(inactive)
Parameter size:
1
[byte]
21. Scene activation for button
22. Scene activation for
button
23. Scene activation for button
24. Scene activation for button
25. Scene activation for button
26. Scene activation for button
This parameter determines which actions result in sending assigned
scene IDs and attributes to the controller.
Available settings:
1
- Key Pressed 1 time
2
- Key Pressed 2 times
4
- Key Pressed 3 times
8
- Key held Down & Released
Default setting:
9
(1x & hold) Parameter size:
1
[byte]
29. Associations in Z-Wave network Security Mode
Parameter defines how commands are sent in specified associa-
tion groups: using Security Mode or not. Parameter is active only
in Z-Wave network Security Mode. It does not apply to 1st “Lifeline”
association group.
Available settings:
1
- 2nd group sent using Security Mode
2
- 3rd group sent using Security Mode
4
- 4th group sent using Security Mode
8
- 5th group sent using Security Mode
16
- 6th group sent using Security Mode
32
- 7th group sent using Security Mode
64
- 8th group sent using Security Mode
128
- 9th group sent using Security Mode
256
- 10th group sent using Security Mode
512
- 11th group sent using Security Mode
1024
- 12th group sent using Security Mode
2048
- 13th group sent using Security Mode
Default setting:
4095
Parameter size:
2
[bytes]
NOTE
Parameter 29 values
may be combined,
e.g. 1+2=3 means that
2nd & 3rd group are
sent using Security
Mode.
i
NOTE
Parameters 21 to 26
values may be com-
bined, e.g. 1+2=3
means that clicking
button once or twice
will result in sending
assigned scene ID.
i
