4
1 Installation
1.1 Installation Home Center
Install the Home Center as described in the printed manual.
Start Home Center by the
POWER
button on the back and wait approx. 2 minutes to boot.
When the Home Center is correctly installed and fully booted, three LEDs will light up. This means
POWER, NETWORK AND INTERNET
(from right to left). like the picture below:
HC2 correct boot LEDs:
HCL correct boot LEDs:
In case the LEDs are not the same as the picture, please refer to
Appendix B - Booting with only
two LEDs.
IMPORTANT
: The installation may not be continued before having the correct three LEDs.