PWR-LINE PRO
The PWR-LINE PRO allows Ethernet-like connectivity between supported devices over regular electrical power lines. When plugged into the same
electrical circuit, the device will establish Ethernet connectivity by using the HomePlug AV 2 standard. PWR-LINE PRO does not require any system
software or configuration, it's ready to use.
Connecting
Plug one PWR-LINE PRO device into a power socket.
Connect to one of the LAN ports of your MikroTik router to the PWR-LINE PRO Ethernet port.
Plug another PWR-LINE PRO unit (or any other compatible device) somewhere in the same electrical circuit.
section on how to pair additional PWR-LINE PRO devices.
PWR-LINE PRO supports PoE out from Ethernet port to power another Mikrotik device, this can be activated with a switch, please see
Mounting
PWR-LINE PRO can be mounted on the wall using four provided screws:
To access mounting points, remove a center screw, that is holding top cover, using PH2 screwdriver.
Mark four points for screw holes in the desired place on the wall for PWR-LINE PRO.
Drill using a 5 mm drill bit for dowel holes and insert them by slight tapping if necessary.
Mount PWR-LINE PRO and close top cover, center screw tightening force 0.5 – 0.7 Nm, attach provided 3M sticker to cover center screw.
Powering
