FIBARO FIBEFGWDEU-111, Руководство пользователя

Страница: 8 / 15

30.08.2019 manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGWDEU-111
manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGWDEU-111 8/15
Setting Description
0 LED disabled
1 White
2 Red
3 Green
4 Blue
5 Yellow
6 Cyan
7 Magenta
8 colour changes smoothly depending on measured power
9 colour changes in steps depending on measured power
Parameter 12: LED framecolour when OFF
This parameter defines the LED colour when the device is OFF.
Size: 1 Byte, Default Value: 0
Setting Description
0 LED disabled
1 White
2 Red
3 Green
4 Blue
5 Yellow
6 Cyan
7 Magenta
Parameter 13: LED framebrightness
This parameter allows to adjust the LED frame brightness.
Size: 1 Byte, Default Value: 100
Setting Description
0 LED disabled
1 - 100 (1-100% brightness)
101 brightness directly proportional to set level
102 brightness inversely proportional to set level
Parameter 24: Buttons orientation
This parameter allows reversing the operation of the buttons.
Size: 1 Byte, Default Value: 0
Setting Description
0 default (1st button brightens, 2nd button dims)
1 reversed (1st button dims, 2nd button brightens)
Parameter 30: Alarm configuration - 1st slot
This parameter determines to which alarm frames and how the device should react. The parameters consist of 4 bytes, three most significant bytes are set
according to the official Z-Wave protocol specification.
Size: 4 Byte, Default Value: 0
Setting Description
1 - 0 [MSB]Notification Type
2 Notification Value
3 Event/State Parameters
4 [LSB]action
Parameter 31: Alarm configuration - 2nd slot
This parameter determines to which alarm frames and how the device should react. The parameters consist of 4 bytes, three most significant bytes are set
according to the official Z-Wave protocol specification.