7
OPERATInG THE DEVICE
#5: Operating the device
Tamper (TMP) button:
The Door/Window Sensor 2 is equipped with a tamper switch with
two buttons.
First TMP button is located inside the device, pressed by the closed
cover and is used to detect openning it.
Second TMP button is located at bottom of the device, pressed by the
surface on which the device is mounted and is used to detect detach-
ing the device.
For the tamper switch to work one of the buttons must always be
pressed!
When one of the buttons is released, the tamper alarm will be send to
the controller and associated devices.
Additionally, tamper button allows to control the device directly.
TMP
button
TMP
button
Waking up the Door/Window Sensor 2:
The Door/Window Sensor 2 needs to be woken up to receive informa-
tion about the new configuration from the controller, like parameters
and associations.
To wake up the sensor manually, click one of the TMP buttons (while
the other button is pressed).
Controlling the Door/Window Sensor 2 with FIBARO Home Center
controller:
After adding the Sensor to the FIBARO System, it will be represented
by two or three icons in Home Center interface.
First icon informs about the status of magnetic sensor (open/close),
second icon displays temperature measured by the built-in sensor.
Third icon is assigned to high/low temperature alarm and is visible only
if parameter 54 is not equal to 0.