FIBARO DOOR/WINDOW SENSOR 2 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 16

FIBARO DOOR/WINDOW SENSOR 2 Скачать руководство пользователя страница 3

3

DESCRIPTIOn AnD FEATURES

Main features of FIBARO Door/Window Sensor 2:

• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network Security Mode) with

AES-128 encryption,

• Door/window opening detected through separation of Sensor’s

body and a magnet,

•  Built-in temperature sensor,
•  Detects tampering, when detached or opened,
•  Easily mounted on doors, windows, garage gates and roller blinds,
•  Battery powered,
•  Visual LED indicator signalling status of the device,
•  7 color variations.

FIBARO Door/Window Sensor 2

is a wireless, battery powered Hall

effect contact sensor, compatible with the Z-Wave Plus standard.

Changing the device’s status will automatically send signal to the

Z-Wave controller and associated devices.
Sensor can be used to trigger scenes and wherever there is a need

for information about opening or closing of doors, windows, garage

doors, etc. Opening is detected by separating the sensor’s body and

the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with

a built-in temperature sensor.

#1: Description and features

FIBARO Door/Window Sensor 2

is a fully compatible Z-Wave

PLUS device.

NOTE

This device may be

used with all devices

certified with Z-Wave

Plus certificate and

should be compatible

with such devices pro-

duced by other manu-

facturers.

i

NOTE

Z-Wave Controller

must support Z-Wave

Security Mode in

order to fully utilize the

product.

i

«
1
2
3
4
5
...
»

Содержание DOOR/WINDOW SENSOR 2

















Отзывы:

Нет отзывов