manualshive.com logo in svg

FIBARO DOOR/WINDOW SENSOR 2, Руководство по эксплуатации, Страница: 10 / 16

Поделиться
Скачать
FIBARO DOOR/WINDOW SENSOR 2 Скачать руководство пользователя страница 10

10

ADVAnCED PARAMETERS

#7: Advanced parameters

The Door/Window Sensor 2 allows to customize its operation to user’s 

needs. Settings are available in the FIBARO interface as simple op-

tions that may be chosen by selecting the appropriate box.
In order to configure the Door/Window Sensor 2 (using 

 

the Home Center controller):
1.  Go to the device options by clicking the icon:   
2.  Select the „Advanced” tab.

1. Door/window state

This parameter allows to set in what state is door/window when the 

magnet is close to the sensor.

Available settings:

0

 - closed when magnet near

1

 - opened when magnet near 

Default setting: 

0

Parameter size:

1

 [byte]

2. Visual LED indications

This parameter defines events indicated by the visual LED indicator. 

Disabling events might extend battery life.

Available settings:

1

 - indication of opening/closing status change

2

 - indication of wake up (1 x click or periodical)

4

 - indication of device tampering

Default setting: 

6

Parameter size:

1

 [byte]

Wake up interval

Available settings: 

0

 or 

3600-64800

 (in seconds (1-18h), 3600s (1h) 

step)
Default setting: 

21600

 (6h)

The Door/Window Sensor will wake up after each defined time inter-

val and always try to connect with the main controller. After a suc-

cessful communication attempt, the sensor will update configuration 

parameters, associations and settings and will go into standby mode. 

After failed communication attempt (e.g. lack of Z-Wave range) the 

device will go into standby mode  and retry to establish connection 

with the main controller after the next time interval.
Setting wake up interval to 0 disables sending Wake Up notification 

frame automatically. Wake up may be still performed manually by a 

clicking one of the TMP buttons (while the other button is pressed).
Longer time interval means less frequent communication and thus a 

longer battery life.

NOTE

Entering invalid value 
of parameter will re-
sult in response with 
Application Rejected 
frame and not setting 
the value.

i

NOTE

Parameter 2 values 
may be combined, e.g. 
1+2=3 means that in-
dications for opening/
closing and waking up 
are enabled.

i

Содержание DOOR/WINDOW SENSOR 2

















Отзывы:

Нет отзывов