IN CASE OF EMERGENCY
241
Jack Warning Label
1. Remove the spare tire, jack, and wheel bolt
wrench.
2. If equipped with wheels where the center
cap covers the wheel bolts, use the wheel
bolt wrench to pry the center cap off
carefully before raising the vehicle.
3. Before raising the vehicle, use the wheel
bolt wrench to loosen, but not remove, the
wheel bolts on the wheel with the flat tire.
Turn the wheel bolts counterclockwise one
turn while the wheel is still on the ground.
Loosen The Wheel Bolt
NOTE:
Placement for the front and rear jacking loca
-
tions are critical. See below images for proper
jacking locations.
Front And Rear Jacking Locations
Only use the jack in the positions indicated
and for lifting this vehicle during a tire
change.
If working on or near a roadway, be
extremely careful of motor traffic.
To assure that spare tires, flat or inflated,
are securely stowed, spares must be
stowed with the valve stem facing the
ground.
WARNING!
(Continued)
CAUTION!
Do not attempt to raise the vehicle by jacking
on locations other than those indicated in the
Jacking Instructions for this vehicle.
7
21_FD_OM_EN_USC_t.book Page 241