Fiat 124 Spider, Руководство пользователя

Страница: 37 / 216

35
CONTROL SWITCHES
1 – Temperature control dial.
2 – Fan control dial. The fan has seven
speeds. AUTO position : the amount of
air flow will be automatically controlled
in accordance with the set temperature.
Except AUTO position : the air flow
amount can be adjusted to the desired
level by turning the dial.
0 position : to
turn off the system, set the dial to
0 position.
3 – Mode selector dial. Turn the mode
selector dial to select air flow mode.
AUTO position : the air flow mode
automatically adjusts to the selected
temperature. Except AUTO position:
the desired air flow position can be
selected by turning the dial.
4 – Rear window defogger switch.
Press the switch to turn on the rear
window defogger. The rear window
defogger operates for about 15 minutes
and then turns off automatically.
5 – Air intake selector. Outside or
recirculated air positions can be
selected. Press the switch to select
outside/recirculated air positions.
6 – A/C switch. The air conditioning
(cooling/dehumidifying functions) can
be turned on or off by pressing the
switch while the fan control dial is at a
position other than 0.
POWER WINDOWS
CONTROLS
45) 46)
The ignition must be switched ON for
the power windows to operate.
If the power window does not
open/close, wait a moment and then
operate the switch again.
Passenger control switches
The passenger window can also be
operated using the master control
switches on the driver's door fig. 26:
1
(driver's window) / 2 (passenger's
window).
Opening / closing power windows
1 - Closing fig. 27: lightly pull up the
switch. 2 - Opening: lightly hold down
the switch.
Auto-opening power windows
To fully open the window automatically
press the switch completely down. To
stop the window partway pull or press
the switch in the opposite direction and
then release it. The power window
cannot be fully closed while the door is
open.
Power window system initialization
procedure
If the battery was disconnected during
vehicle maintenance, or for other
reasons (such as a switch continues to
be operated after the window is
open/closed), the window will not fully
open automatically.
Resetting of the automatic function can
be performed using the master control
switches or each passenger door
switch.
The power window auto function reset
26
04070103-LN2-002
27
04070103-L12-001