4. Turn the audio control dial to select
the name of the device you would
like to link.
5. Press the audio control dial to select
the device you would like to link. The
symbol disappears, and “PAIRING”
flashes in the audio display.
Note:
When “GO BACK” is selected
and the audio control dial is pressed,
the display returns to “LINK CHANGE”.
6. If the link to the desired device is
successful, the music note symbol is
displayed again, together with “LINK
CHANGED”. “LINK CHANGED” is
displayed for three seconds; it then
returns to the normal display.
Note:
Some Bluetooth audio devices
need a certain amount of time before
the music note symbol is displayed.
If a hands-free type mobile phone
has been the most recently paired
device, the Bluetooth unit links this
device. If you would like to use a
Bluetooth audio type device which has
been previously paired to the Bluetooth
unit, the link must be changed to this
device.
If an error occurs while trying to link
a device, “Err” flashes in the audio
display for three seconds, and the
display returns to “LINK CHANGE”. If
this occurs, check the pairing status of
the Bluetooth audio device and the
location of the device in the vehicle
(not in the trunk or a metal-type box),
and then try the link operation again.
Device selection can also be done
using voice recognition.
How To Confirm The Device
Currently Linked
Switch to the link-change mode.
The device name displayed first is the
device which is currently linked.
Deleting A Device
Proceed as follows:
1. Using the audio control dial, select
the pairing delete mode “PAIR DELETE”
in the “BT SETUP” mode (refer to
“Bluetooth Audio Device Setup” for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the first device among
the paired devices is displayed.
4. Rotate the audio control dial and
select the name of the paired device
you would like to delete.
GUID-PAG47A
30
FIAT
Radio
3.0
