Phrase
Mode
Function
DEVICE
INFO
Device
Information
Display
Mode
Displaying
Vehicle's
Bluetooth
Unit
Information
Press the audio control dial to
determine the mode.
Bluetooth Audio Device Pairing
Any Bluetooth audio device must be
paired to the vehicle's Bluetooth unit
before it can be listened to over the
vehicle's speakers.
A maximum of seven devices including
Bluetooth audio devices and hands
free mobile phones can be paired
to one vehicle.
Note:
If a Bluetooth device has already
been paired to the vehicle as a
hands-free mobile phone, it does not
need to be paired again when using
the device as a Bluetooth audio
device. Conversely, it does not need to
be paired again as a hands-free mobile
phone if it has already been paired as
a Bluetooth audio device.
Device registration can also be
done using voice recognition.
Concerning the operation of a
Bluetooth audio device itself, refer to its
instruction manual.
Some Bluetooth audio devices have
PIN codes (four digits). Refer to the
audio device's instruction manual
because the pairing procedure differs
depending on whether it has a PIN
code or not.
Pairing A Bluetooth Audio
Device Which Has A Four-Digit
PIN Code
Proceed as follows:
1. Using the audio control dial, select
the pairing mode “ PAIR DEVICE ”
in the “BT SETUP” mode. (refer
to “Bluetooth Audio Device Set-Up” for
details).
2. Press the audio control dial to
determine the mode. After “ENTER PIN
” is displayed on the audio display for
three seconds, “PIN 0000” is displayed
and the PIN code can be input.
3. Input the PIN code of your Bluetooth
audio device by pressing channel
preset buttons 1 to 4 while “PIN 0000”
is displayed. Press channel preset
button one to input the first digit, two
for the second, three for the third,
and four for the forth. For example, if
the PIN code were “4213” press
channel preset button “one” four times
(one, two, three, four), button “two”
twice (one, two), button “three” once
(one), and button “four” three times
(one, two, three). If the “PIN 0000”
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
Note:
Some devices accept only a par-
ticular pairing code (Usually, “0000” or
“1234”). If pairing cannot be completed,
refer to the owner's manual of your
mobile device, and try those numbers if
necessary.
4. Press the audio control dial while the
input PIN code is displayed. “PAIRING”
flashes on the audio display.
5. Operate the Bluetooth audio device
and set it to the pairing mode while
“PAIRING” is flashing.
6. When the pairing is completed, a
music note and “PAIR SUCCESS” are
displayed after about 10-30 seconds,
after which “PAIR SUCCESS” continues
to be displayed for three seconds, and
then the unit returns to the normal
display.
28
FIAT
Radio
3.0
