How To Use AUX Mode
Proceed as follows:
1. Switch the ignition to ACC or ON.
2. Push the power/volume dial to turn
the audio system on.
3. Push the MEDIA button of the audio
unit to change to the AUX mode.
Note:
When the device is not connected
to the auxiliary jack, the mode does
not switch to the AUX mode.
Adjust the audio volume using the
portable audio device or audio unit.
Audio adjustments other than audio
volume can only be done using the
portable audio device.
If the connection plug is pulled out
from the auxiliary jack while in AUX
mode, noise may occur.
How To Use USB Mode —
If Equipped
Type
Playable Data
USB Mode
MP3/WMA/AAC file
This unit does not support a USB
3.0 device. In addition, other devices
may not be supported depending
on the model or OS version.
Playback
Proceed as follows:
1. Place the ignition in ACC or ON.
2. Push the power/volume dial to turn
the audio system on.
3. Push the MEDIA button to switch to
the USB mode and start playback.
Note:
Some devices, such as smart
phones, may require a setting change
to allow a USB connection.
When the USB device is not
connected, the mode will not switch to
USB mode.
When there is no playable data in
the USB device, “NO CONTENTS”
is flashed.
Playback of the USB device is in
the order of the folder numbers.
Folders which have no MP3/WMA/
AAC files are skipped.
Do not remove the USB device
while in the USB mode. The data may
be damaged.
Pause
To stop playback, push the play/pause
button (four). Push the button again
to resume playback.
Fast-Forward/Reverse
Push and hold the fast-forward button
to advance through a track at high
speed.
Push and hold the reverse button
to reverse through a track at high
speed.
Track Search
1. Push the track down button
within a few seconds after
playback begins to return to the
previous track.
2. Push the track up button
once
to skip to the beginning of the next
track.
3. Push the track down button
after a few seconds of playback to
start from the beginning of the current
track.
17
FIAT
Radio
3.0
