Fiat Kobelco EX355 Tier2, Техническое руководство

Страница: 4 / 968

IN-2 EX355
INTRODUCTION
To To
Quantity convert Into Multiply by Quantity convert Into Multiply by
from (SI) (Others) from (SI) (Others)
Lenght mm in 0.039 37 Pressure MPa kgf/cm
2
10.197
mm ft 0.003 281 MPa psi 145.0
L US gal 0.264 2 Power kW CV-PS 1.360
Volume L US qt 1.057 kW HP 1.341
m 3 yd 3 1.308 Temperature °C °F °C x 1.8 + 32
Weight Kg lb 2.205 Velocity Km/h mph 0.621 4
Force N kgf 0.101 97 min -1 rpm 1.0
N lbf 0.224 8 Flow rate L/min US gpm 0.264 2
Torque N.m Kgf.m 0.10197 ML/rev Cc/rev 1.0
N.m lbf.ft 0.737 5
PAGE NUMBER
• Each page has a number, located on the external upper corner of the page. Each page number contains the
following information:
Example: T 1-2-3
Consecutive page number for each group
Group number (if exist)
Section number
T : Technical Manual
W : Workshop Manual
SYMBOLS
In this manual, the following safety alert symbol and signal words are used to alert the reader to the potential for
personal injury or machine damage.
This is the safety alert symbol.
When you see this symbol, be alert to the potential for personal injury.
Never fail to follow the safety instructions prescribed along with the safety alert symbol.
The safety alert symbol is also used to draw attentio in to component/part weights.
To avoid injury and damage, be sure to use appropriate lifting techniques and equipment when lifting heavy
parts.
UNITS USED
SI Units (International System of Units) are used in this manual.
MKSA system units and English units are also indicated in parentheses just behinds SI units.
Example: 24.5 MPa (250 kgf/cm 2 , 3560 psi)
A table for conversion from SI units to other system units is shown below for reference purposes.