W1-1-2
EX355
PRECAUTIONS FOR DISASSEMBLY AND ASSEMBLY
SM1000
Bleeding Air from Hydraulic System
When hydraulic oil is drained, the suction filter or the
suction lines are replaced, or the removal and instal-
lation of the pump, swing motor, travel motor or
cylinder is done, bleed air from the hydraulic system
in the following procedures:
•
Bleeding Air from Hydraulic Pump
IMPORTANT -
If the engine is started with air trapped
in the hydraulic pump housing, damage to the pump
may result. Be sure to bleed air before starting the
engine.
- Remove the air bleeding plug from the top of the
pump and fill the pump housing with hydraulic
oil.
- After the pump housing is filled with hydraulic
oil, temporarily tighten the plug. Then, start the
engine and run at slow idle speed.
- Slightly loosen the plug to bleed air from the
pump housing until hydraulic oil oozes out.
- After bleeding all the air, securely tighten the
plug.
•
Bleeding Air from Travel Motor / Swing Motor
- With the drain plug / hose on travel motor / swing
motor removed, fill the motor case with hydrau-
lic oil.
•
Bleeding Air from Hydraulic Circuit
- After refilling hydraulic oil, start the engine.
While operating each cylinder, swing motor and
travel motor evenly, operate the machine under
light loads for 10 to 15 minutes. Slowly start
each operation (never fully stroke the cylinders
during initial operation stage). As the pilot oil
circuit has an air bleed device, air trapped in the
pilot oil circuit will be bled while performing the
above operation for approx. 5 minutes.
- Reposition the front attachment to check hy-
draulic oil level.
- Stop the engine. Recheck hydraulic oil level.
Replenish oil as necessary.
Содержание EX355 Tier2
