2 / 18
Operating Manual - IntellyCom
Notes
Please read the operating manual carefully before installing the device.
Texts and illustrations have been compiled and software created with the utmost care,
however errors cannot be completely ruled out. This documentation is therefore supplied
under exclusion of any liability or warranty of suitability for specific purposes. FHF
reserves the right to improve or modify this documentation without prior notice.
Before opening or dismounting the device it has to be separated from
all voltage supply
.
General Description
The IntellyCom is a weatherproof Intercom Station which can be operated in the
analogue, public telephone network or can be connected to analogue terminals of branch
exchanges.
The IntellyCom is available in different designs:
•
With casing it is made for wall mounting or it can be fixed on pylons and joists.
•
Without casing it is meant as built-in unit.
This manual describes below the construction with casing. The connection of the built-in
unit is made correspondingly, but without considering the cable entries.
The Intercom Station comprises
- a loudspeaker and
- a microphone for voice communication
- a hookswitch key as operating element
- and a LED (part of the hookswitch key)as loop current indicating element.
Utilization and programming is identical in all devices.
Features
- Pulse / tone dialing
- Automativ cleardown capability
- Automatic answering capability or answering after a programmable number of
rings
-
Chained numbers if the the called number is busy or does not answer after a
programmable time
-
Remote programming of
•
telephone number
•
ringer volume
•
ringer melody
•
loudspeaker volume
•
automatic call acceptance
•
dialing type
