Go to fetco.com for the latest versions of all information
Page 8
P167 November 2017
D OUTPUTS
Test Valves and Heaters-Set screen brightness
POSITION Program
Items
Factory set
Default
Programming Range
Increments
Notes
D1
Left Valve Test
(Press To Test)
TEST
/-
OFF or ON
Runs valve to verify
flow. NOTE!-Have
container under
brew-basket!
RIGHT Valve display is only for CBS-1152 XV+ twin side brewer. Single series displays LEFT side only
D2
Right Valve Test
(Press To Test)
TEST
/-
OFF or ON
Press To Test
D3
Fill Valve Test
(Press To Test)
TEST
/-
OFF or ON
Press To Test
D4
Heater Test
(Press To Test)
Activates heaters 3
seconds
/-
OFF or ON
Energizes
Heater(s)
WARNING! Service
use only.
D5 LCD
Brightness Brightness=8
0-15
1
Very dim to bright
illumination
.
E OTHER
Software & Code View and Settings
POSITION Program Items
Factory set Default Programming Range Increments
Notes
E1 Display
Firmware
0.1a
Displays current
version
E2
Select Model
CBS-1152 XV+
Scroll to brewer
model Save&Exit
CBS-1151;
CBS-1152
Will need reboot
E3
Display Errors
Lists up to six
codes, in order
1:
;
2:
;
3:
;
4:
;
5:
;
6:
Newest=Last
See Error Code
Chart for
references
E4
Reset Errors
NO +
/-
YES or NO
Factory and
Service use only.
Do Not Reset
Resetting error codes should be after completing the service and factory diagnostics and correcting any brewer faults
NOTE
Clear error codes by cycling the brewer “OFF” then “ON”. See Page 9.
E5
(Reload) DEFAULTS
Reset to default of
base model
Will need reboot
Toggle =/-
YES or NO
COMPLETELY
OVERWRITES ALL
USER SETTINGS.
E5
USB Data Save
Save data to USB
E6
USB Data Load
Load Data from
USB
Will need reboot
E7
Load From USB
Plug in USB flash-
drive device.
Will need reboot
E8
DEMO Mode
DEMO ON/OFF
Will need reboot
Demonstrates the
controls for training.
Disables all components
in demo mode
.
C INPUTS
Brewer Sensors and Keypad
POSITION
Program Items
Factory set Default Programming
Range Increments
Notes
C1
LLC Probe
Continuity
Direct read
Reading of tank water
resistivity in TDS
≈
850- LOW
≈
1600-HIGH
Nominal values
C2
Brew Basket
Sensor
Direct read
YES or NO
C3
Tank Temperature Direct read
Hot water tank
temperature
Actual
values
C4 Keyboard
Test Calibrate
Checks buttons under
membrane cover
YES/NO
Follow directions
on the touch
screen
