Festool DTS 400 REQ, Оригинальное руководство по эксплуатации

Страница: 15 / 20

15
DTS 400 REQ, RTS 400 REQ
3 Intended use
The sanders are designed for sanding wood,
plastic, stone, composites, paint/varnish, filler
and similar materials as directed. Metals and
materials that contain asbestos must not be
processed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
The user is liable for improper or non-in-
tended use.
4 Technical data
Orbital sander DTS 400 REQ RTS 400 REQ
Power 250 W 250 W
No-load speed 6000 –
12000 rpm
6000 –
12000 rpm
Max. speed * 16000 rpm 16000 rpm
Sanding stroke 2.0 mm 2.0 mm
Sanding pad 100 x 150 mm 80 x 130 mm
Weight (without
mains cable,
with sanding
pad) 1.2 kg 1.2 kg
Safety class / II / II
* Max. speed in the event of faulty electronics
5 Machine features
[1-1] On/Off switch
[1-2] Plug it-connection
[1-3] Speed control
[1-4] Extractor connector
[1-5] Sanding pad
[1-6] Protector
[1-7] Long-life dust bag
[1-8] Dust bag adapter
[1-9] Handle (insulated gripping surface)
The specified illustrations appear at the beginning
of the Operating instructions.
6 Commissioning
6.1 Initial operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
X
The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine’s name plate.
X
Observe country-specific regulations.
Connecting and detaching the mains power cable -
see Fig.
[2] .
The switch [1-1] is an on/off switch (I = ON,
0 = OFF).
In case of a power failure or if the mains
connector is removed, move the on/off
switch immediately to the Off position.
This prevents uncontrolled restarting.
7 Settings
CAUTION
Risk of injury, electric shock
X
Always pull the mains plug out of the socket
before performing any type of work on the
machine!
7.1 Electronics
Smooth start-up
The electronically controlled smooth start-up
ensures that the machine starts up jolt-free.
Constant speed
The preselected motor speed is kept constant
through electronic control. This means that, if the
machine is used as intended (reasonable contact
pressure), a constant sanding speed is achieved.
Setting and adjusting the speed
The speed can be set [1-3] between 6000 and
12000 rpm using the adjusting wheel.
This enables you to optimise the sanding speed
to suit the material (see chapter 8).
7.2 Changing sanding pad [3]
An optimal work result can only be
achieved using original accessories and
consumables. The use of non-original
accessories or consumables invalidates
the right to claim under warranty.