Festool DTS 400 REQ, Оригинальное руководство по эксплуатации

Страница: 14 / 20

14
DTS 400 REQ, RTS 400 REQ
f. Do not expose a battery to fire or excessive
temperatures.
Fire or temperatures exceeding
130 °C may cause an explosion.
g. Follow all instructions on charging and never
charge the battery or the cordless tool outside
the temperature range stated in the operating
instructions.
Incorrect charging or charging
outside the permitted temperature range can
destroy the battery and increase the risk of fire.
6 SERVICE
a. Only ever have your power tool repaired by
qualified specialist staff and always use origi-
nal spare parts.
This ensures that the safety of
the power tool is maintained.
b. Never perform maintenance on damaged bat-
teries.
Maintenance on batteries should only
ever be performed by the manufacturer or
authorised customer service centres.
c. Only use original parts for repairs and main-
tenance.
The use of incompatible accessories
or spare parts can result in electric shocks or
other injuries.
2.2 Machine-specific safety instructions for
sliding compound mitre saws
– Dust that is harmful to your health may be
produced as you work (e.g. paint products
containing lead and some types of wood).
Contact with or inhalation of this dust may pose
a risk for the operating personnel or persons in
the vicinity. Observe the safety regulations that
apply in your country.
Wear a P2 respiratory mask to protect
your health. In enclosed spaces, ensure
that there is sufficient ventilation and
connect an extraction system.
Always wear protective goggles to protect
against sanding hazards.
– Clean work equipment soaked in oils, for
example sanding pad or polishing felt, with
water and allow to dry.
Work equipment soaked
in oil may combust spontaneously.
– Attention: Risk of fire! Avoid overheating the
grinding material and the sander. Always
empty the dust container before taking a break.
Swarf in the filter bag or filter of the mobile
dust extractor may self-ignite in unfavourable
conditions such as flying sparks when grinding
metals. Particular danger exists if the swarf is
mixed with paint, polyurethane residue or other
chemical materials and the grinding material
is hot after long periods of work.
– If the power tool is dropped or falls, check
for damage to the machine and sanding pad.
Remove the sanding pad for closer inspection.
Have the damaged parts repaired before use.
Broken sanding pads and damaged machines
can cause injuries and machine instability.
– Always use original Festool sanding pads.
– While using the long-life dust bag be aware
of electric charge. Always when possible use
an antistatic suction hose with the power tool.
A slight electric shock may cause you to panic
briefly and become distracted, which may result
in an accident.
– Only for AS/NZS: The tool shall always be
supplied via residual current device with a rated
residual current of 30 mA or less.
2.3 Emission levels
Typically, the noise levels determined in accordance
with EN 62841 are as follows:
DTS 400 REQ RTS 400 REQ
Sound pressure
level L
PA
72 dB(A) 73 dB(A)
Noise level L
WA
83 dB(A) 84 dB(A)
Uncertainty K 3 dB 3 dB
CAUTION
Operating noise
Damage to hearing
X
Always use ear protection.
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
DTS 400 REQ RTS 400 REQ
Vibration
emission level
(3 directions) a
h
3.5 m/s 2 < 2.5 m/s 2
Uncertainty K 1.5 m/s 2 1.5 m/s 2
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise loads
during operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately.
Take note of idling and downtimes of machine!