Festo ZSB-1/8, Руководство по эксплуатации

Страница: 18 / 64

ZSB−1/8
Festo ZSB−1/8 0701NH English
18
Pne uma ti c in s t a ll a tion
1. Remove the transport covers on the compressed air connections.
2. Connect the tubing with the specified components as per Fig.6.
Wa rnin g
The product will function as intended providing it is set up correctly and if the
exhausting is corrrect.
S
At input 12 of pressure sequence valve VD−3−PK−3 use tubing 1 m longer than
that to input 1.
S
Use the same lengths of tubing between the push−button valves and the
two−hand control unit.
S
Use only 3/2−way push−button valves.
S
Hold open the outputs 3 on the push−button valves.
S
If required on the two−hand control unit, use only one silencer which does not
impede the exhaust air stream.
S
Avoid dirt entering the silencer.
Pne uma ti c c onne c tion C o m ponent C onne c tion s i z e
Inputs 1
1
and 1
2
3/2−way push−button valves G
x
Output 2 Control input of the following
control chain
G
x
Output 3 without connection or
silencer if required
G
x
Fig.6
6 C o mm i ss ionin g
1. Pressurize your system.
2. Screw in the opened adjustment screw of pressure sequence valve VD−3−PK−3
until the switching pressure is at least 3 bar.
Use e.g. a control manometer for this purpose.