Festo ZSB-1/8, Руководство по эксплуатации

Страница: 21 / 64

ZSB−1/8
Festo ZSB−1/8 0701NH English
21
11 E li m in a tin g fau lt s
F au lt Po ss ible caus e Re m e d y
Output 2 not pressurized
despite actuation time of both
push buttons
<
0.5 s
Input pressure too high Reduce the input pressure at
1
1
and 1
2
Implementing suitable
measures for limiting the
pressure
Different lengths of tubing for
the push−button valves Cut equal lengths of tubing for
the push−button valves
Output 2 pressurized despite
actuation time of both push
buttons
>
0 5 s
Input pressure too low Increase the input pressure at 1
1
and 1
2
to at least 3 bar
buttons
>
0.5 s
releasing a push button
Faulty push button Replace push button
g p
Installation fault (tubing bent) Installation of components as
per DINEN983
Output 2 pressurized despite
the fact that only 1 push
button is actuated Functional fault Return to Festo
Pressure reduction at output
2 takes too long Tubing fault Use short tubing
Avoid angled screw
connectors
Silencer dirty Clean or replace silencer
Air streams out of 3 when
both push−button valves are
actuated Functional fault Return to Festo
Fig.9