VABF-S4-1-V2B1...
Festo – VABF-S4-1-V2B1... – 1705c English
21
6.3
Edit mode
The following settings can be conducted in the EDIT mode:
–
switching function (threshold value or window comparator)
–
switching points [SP] or [SP] [min] and [SP] [max]
–
hysteresis [HY]
–
switching element function [NO/NC] (N/O contact/N/C contact)
–
filter option [ON/OFF] (smoothing of measured values)
–
security code (Lock)
Note
Always use “threshold value comparator” for the switching function and “N/O contact”
for the switching element function.
6.3.1
Start EDIT mode
Warning
Depending on the functions of the machine/system, the manipulation of signal statuses
can cause serious injury to people and material damage.
Note that if the switching characteristics of the switching outputs is modified in
the EDIT mode, the new status will be effective immediately.
Note
The EDIT button is often used during commissioning to select and confirm values. In
order to avoid damaging the EDIT button, please press it using a blunt object.
Various settings can be selected with the operating keys.
–
output (Out A, Out B), for which the characteristics are to be set
–
special menu
1. Press the Edit button.
è
The EDIT mode is active and [Out A] flashes or, if there is an active security lock, [Lock] flashes.
2. Press the UP/DOWN keys (A-/B-keys), until the selected security code is set.
3. Press the Edit button.
è
The EDIT mode is active and [Out A] flashes.
The “Edit mode” menu structure can be found in chapter 13.
