Festo SBOC-M-R1B-H, Руководство пользователя

Страница: 43 / 88

3. Installation
3-7
Festo GDCS-SBOC-EN en 1602a
Note
Electromagnetic interference can cause malfunctions. To
ensure electromagnetic compatibility in accordance with
the EMC directives:
Use only one of the following cables with sockets from
Festo for connecting the operating voltage supply and
the inputs/outputs (see Tab. 3/2).
Connect the screening of the cable with socket on the
side opposite the vision system to the earth potential
with low impedance.
The following table shows the original cables which should be
used for connecting the operating voltage supply and the
I/Os:
Type Designation Description
SIM-M12-8GD-2-PU
SIM-M12-8GD-5-PU Plug socket with cable
Plug socket with cable
Cable for operating voltage supply
– Straight socket, M12x1, 8-pin, core ends tin-plated
– Length 2 m
– Length 5 m
Tab. 3/2: Cables for operating voltage supply and digital I/Os
Note
The cables with socket must not be lengthened!
The operating voltage is supplied together with the input/
output circuit via the 8-pin M12 plug marked “24 V DC” (see
also Tab. 3/3). The following components are supplied with
+24 V DC via this connection:
– the internal electronics of the Compact Vision System
– the load current of activated outputs.
The maximum permissible current at the supply is 2 A.