Festo KBS_FEC FC34- 0206NH English
35
8. If you are using the Multiprog software:
8.1. Create a new project using the template for the
IPC FEC FC34.
8.2. Save the project under a meaningful name.
8.3. Download the project to the controller (does not
have to be programmed). If you are not using
COM1 on your programming PC, then you must
first switch to the COM port that you are using.
8.4. Start the controller. If you now apply a signal at
the input, the output with the same address must
switch to “1“.
All remaining data can be found in manual for the IPC FEC
Compact or the product CD.
