Festo KBS_FEC FC34- 0206NH English
29
5
Important installation instructions
Please note
The power packs used for the 24 V DC main power sup-
ply (Power connections) and power supply to the digital
inputs and transistor outputs (nominally 24 V DC) must
guarantee reliable isolation of the operating voltage in
accordance with IEC 742 / EN 60742 / VDE 0551, PELV
and offer an insulation resistance of at least 4 kV.
Switched-mode power supplies that offer reliable isola-
tion as defined in EN 60950 / VDE 0805 are also per-
mitted.
The PS1 PSE3 power pack fulfils all the above require-
ments.
The power relays used allow mains voltages from overvol-
tage category II to be switched directly, and the insulation
resistance between contacts and coil is 3000 V AC.
For TP and cross-over cables, shielded cable must be used
exclusively. TP cables of type S/STP are suitable. The
shielding must be connected at both ends to low impe-
dance free earths over as large an area as possible. The
casings of the solenoids used must also have low impe-
dance earth connections.
