Festo IIFB9-02 Series, Руководство пользователя

Страница: 62 / 165

3. Remove 5 mm of insulation from the end of
the cables.
4. If necessary, fit the strands with cable end
sleeves.
5. Connect the ends of the conductors.
6. Replace the connection part onto the hous-
ing of the plug/socket. Pull the cable back so
that it is not looped around inside the socket.
7. Close the plug/socket as follows:
●
Power supply socket:
Press with the thumb from the front onto
the socket and tighten the housing.
●
Sensor plug, bus cable socket:
Tighten the knurled nut.
8. Tighten the strain relief of the plug/socket to
prevent the cable connection from becoming
loose.
connection
part
Cable
Housing
Strain relief
Socket Plug
Fig. 4/18: Plug/socket parts and cable routing
VIFB9 - 02 4. Installation
9609
4-25