Festo IIFB9-02 Series, Руководство пользователя

Страница: 43 / 165

Preparing the sub-base
Connections for common lines are provided on
both sides of the sub-base. The common lines
can therefore be fitted on the left or the right,
depending on individual requirements. To in-
crease the air flow, we recommend that the lines
for compressed air supply and ventilation be
connected on both sides in the following cases:
•
when the valve terminal/valve sensor terminal
has more than 10 valves (rated supply pres-
sure 6 bar).
•
with large volume actuators
The connections should be made in accordance
with the table below.
Connections
for common
lines
(adhesive
foil) Connections
for common
lines (blind
plugs)
3/5
1
5/3
Fig. 4/3: Connections on the sub-base
Connection for common lines Procedure
Unilateral Remove all adhesive foils;
remove all blind plugs and fit on one side
Bilateral Remove all Lupolen plugs and blind plugs
VIFB9 - 02 4. Installation
4-6
9609