Festo IIFB9-02 Series, Руководство пользователя

Страница: 61 / 165

Connecting the valve terminal/valve sensor terminal
Connecting the cables to the plugs/sockets
If one of the plugs is not used, it should be
sealed with a protective cap (protection class
IP65).
1. Open the plugs/sockets as follows
(see diagram):
●
Power supply socket:
Insert the power supply socket into the oper-
ating voltage plug on the valve terminal/
valve sensor terminal. Unscrew the housing
part of the socket. Now remove the connec-
tion part of the socket from the plug.
●
Sensor plug
(for electrical inputs/outputs):
Unscrew the centre knurled nut.
●
Bus cable socket (for SINEC L2-DP
connection):
Unscrew the centre knurled nut.
2. Unscrew the strain relief part at the rear of
the housing. Insert the cable as follows (see
diagram):
Cable diameter:
●
for power supply socket: 6.5 mm ... 8.0 mm
for sensor plug:
4.0 mm ... 6.0 mm
for bus cable socket:
PG 9:
8.0 mm ... 9.5 mm
PG 13.5: 12.0 mm ...13.5 mm
VIFB9 - 02 4. Installation
4-24
9609